數控轉塔沖床
歐式機械 EURO-MACH
間隔環解決方案
Interval Ring Solution
方案概述 Interval Ring Solution Overview
由硬質工具鋼或者不銹鋼制成的間隔環。間隔環和推料環一起使用可以精確定位分條圓刀在刀軸上的位置，也可以精確調整上下刀的間隙。對于自動裝刀系統上的使用，我們會提供特殊邊部尺寸的工具。
A spacer ring made of hard tool steel or stainless steel. The spacing ring and pushing ring can be used together to precisely locate the position of the slitting circular knife on the tool axis, and also to precisely adjust the clearance between the upper and lower knives. For the use of automatic tool loading system, we will provide tools with special edge sizes.
常規間隔環 Standard Models
- 厚度范圍從 0.1 到 100mm（在特殊情況下可以達到 250mm）
- 表面處理可分為研磨，精磨和拋光精細打磨
- 特殊的邊部尺寸
- 厚度公差可達 ±0.0005mm
- 特制的推料和送料環
- Thickness ranges from 0.1 to 100 mm (250mm in special cases)
- Surface treatment can be divided into grinding, finishing and polishing / Fine grinding
- Special Edge Size
- Thickness tolerance can reach (+0.0005mm)
- Special Push and Feed Ring
- 上一個：松式橡膠圈
- 下一個：分切行業用刀